Fujitsu PRIMERGY TX2560 M2

TX2560 M2 / RX2560 M2 Upgrade and Maintenance Manual 27
1 Introduction
The FUJITSU Server PRIMERGY TX2560 M2 is a tower server with maximum
levels of performance, expandability and availability.
The FUJITSU Server PRIMERGY RX2560 M2 is the same server as a rack
server.
I For further information about features and how to install, set up and
operate your server, refer to the corresponding operating manual.
Concept for this manual
This Upgrade and Maintenance Manual provides instructions for the following
procedures:
● Upgrading the server configuration by adding optional hardware
components
● Upgrading the server configuration by replacing existing hardware
components with superior ones.
● Replacing defective hardware components
This manual focuses on on-site maintenance tasks. It is recommended to
prepare each service assignment following remote diagnostics procedures, as
described in the "ServerView Suite Local Service Concept (LSC)" manual (see
section "Documents you need at hand" on page 39.
V CAUTION!
The document at hand comprises procedures of a wide range of
complexity. Check the profile of qualification for technicians before
assigning tasks. Before you start, carefully read "Classification of
procedures" on page 31.