404
Upgrade and Maintenance Manual TX2560 M2 / RX2560 M2
12.4.2 Removing the defective accessible drive
Ê
Remove all cables from the accessible drive.
Ê
Remove the accessible drive as described in section "Removing an
accessible drive" on page 402.
12.4.3 Installing the new accessible drive
Ê
Install the accessible drive as described in section "Installing an accessible
drive" on page 398.
Ê
Reconnect all cables to their original accessible drive connectors as
described in section "Cabling" on page 509.
12.4.4 Concluding steps
Ê
"Installing the system fan holder" on page 94
Ê
"Installing the system air duct" on page 92
Ê
"Reassembling" on page 74
Ê
"Connecting the power cord" on page 87
Ê
"Switching on the server" on page 90
Ê
If applicable, "Reconfiguring the backup software solution" on page 124