388
Upgrade and Maintenance Manual TX2560 M2 / RX2560 M2
11.5.4 Replacing heat sinks
11.5.4.1 Removing the heat sink
Ê
Remove the heat sink as described in section "Removing heat sinks" on
page 387.
11.5.4.2 Applying thermal paste
Ê
Apply thermal paste to the CPU surface as described in section "Applying
thermal paste" on page 389.
I
If the CPU upgrade or replacement kit contains a new CPU heat sink,
a thin layer of thermal compound has already been pre-applied to its
lower surface. In this case, please proceed with section "Installing the
heat sink" on page 388.
11.5.4.3 Installing the heat sink
Ê
Install the heat sink as described in sections "Preparing the heat sink and
CPU" on page 385 and "Installing the heat sink" on page 386.
11.5.5 Concluding steps
Ê
"Installing the system air duct" on page 92
Ê
"Reassembling" on page 74
Ê
"Connecting the power cord" on page 87
Ê
"Switching on the server" on page 90
To Next Page
Loading...
