454
Upgrade and Maintenance Manual TX2560 M2 / RX2560 M2
System board and components
Ê
"Reassembling" on page 74
Ê
"Connecting the power cord" on page 87
Ê
"Switching on the server" on page 90
Ê
"Verifying system information backup / restore" on page 121
Ê
"Verifying the system time settings" on page 132
14.3 USB Flash Module (UFM)
14.3.1 Installing the UFM
14.3.1.1 Preliminary steps
Ê
"Suspending BitLocker functionality" on page 111
Ê
"Disabling SVOM boot watchdog functionality" on page 112
Ê
"Shutting down the server" on page 58
Ê
"Disconnecting the power cord" on page 59
Ê
"Getting access to the component" on page 61
Ê
If applicable, remove an expansion card in slot 1 as described in section
"Removing expansion cards from standard slots" on page 300.
Upgrade and Repair Unit
(URU)
Hardware: 5 minutes
Software: 5 minutes
Tools:
tool-less
To Next Page
Loading...
