TX2560 M2 / RX2560 M2 Upgrade and Maintenance Manual
143
6 Power supply unit (PSU)
Safety notes
V CAUTION!
●
Do not disassemble the PSU. Doing so may cause electric shock.
●
Areas around the PSU may remain extremely hot after shutdown.
After shutting down the server, wait for hot components to cool down
before removing the PSU.
●
When installing a PSU, ensure that the connector of the PSU is not
damaged or bent.
●
If the PSU is hard to remove, do not pull it out by force.
●
The PSU is heavy, so handle it carefully. If you drop it by mistake,
injuries may result.
●
For further safety information, please refer to chapter "Important
information" on page 43.
To Next Page
Loading...
Need help?
General