TX2560 M2 / RX2560 M2 Upgrade and Maintenance Manual
331
Expansion cards and backup units
9.4.5.4 Concluding steps
Ê
Install the SAS RAID controller as described in section "Installing expansion
cards in standard slots" on page 295.
Ê
Connect the SAS cables to their original connectors on the SAS RAID
controller.
Ê
"Reassembling" on page 74
Ê
"Connecting the power cord" on page 87
Ê
If applicable, "Updating RAID controller firmware" on page 122
Ê
"Enabling SVOM boot watchdog functionality" on page 130
To Next Page
Loading...
