TX2560 M2 / RX2560 M2 Upgrade and Maintenance Manual
39
2.4 Documents you need at hand
Maintenance procedures may include references to additional documentation.
When preparing the maintenance task, ensure that all required manuals are
available according to the overview below.
I – Ensure to store all printed manuals enclosed with your server in a
save place for future reference.
– Unless stated otherwise, all manuals are available online at
http://manuals.ts.fujitsu.com under x86 Servers.
For the Japanese market please use the following address:
http://www.fujitsu.com/jp/products/computing/servers/primergy/manual/
Torx PLUS-6IP
0.2 Nm
Ultraslim
ODD locking
clamp
M2 x 4 mm
(silver)
C26192-Y10-C166
SW5
0.4 Nm
Slot bracket
to controller,
rack
mounting
bracket
M3 x 3.5 mm
(silver/black)
C26192-Y10-C151
Phillips
PH2 / (+) No. 2
0.6 Nm
5.25-inch
accessible
drive dummy
module
M3 x 6 mm
(silver/black)
C26192-Y10-C111
Screw driver /
Bit insert
Torque
Screw Usage Type
Table 3: List of used screws (Japanese market)
To Next Page
Loading...
