348
Upgrade and Maintenance Manual TX2560 M2 / RX2560 M2
Expansion cards and backup units
9.6.3 Replacing the serial interface
9.6.3.1 Preliminary steps
Ê
"Disabling SVOM boot watchdog functionality" on page 112
Ê
"Locating the defective server" on page 55
Ê
"Shutting down the server" on page 58
Ê
"Disconnecting the power cord" on page 59
Ê
"Getting access to the component" on page 61
9.6.3.2 Removing the defective serial interface
Ê
Remove the serial interface as described in section "Removing the serial
interface" on page 347.
9.6.3.3 Installing the new serial interface
Ê
Install the serial interface as described in section "Installing the serial
interface" on page 345.
9.6.3.4 Concluding steps
Ê
"Reassembling" on page 74
Ê
"Connecting the power cord" on page 87
Ê
"Switching on the server" on page 90
Ê
"Enabling SVOM boot watchdog functionality" on page 130
Upgrade and Repair Unit
(URU)
Hardware: 5 minutes
Tools:
nut driver 5 mm
To Next Page
Loading...
