270
Upgrade and Maintenance Manual TX2560 M2 / RX2560 M2
Hard disk drive (HDD) / solid state drive (SSD)
7.6.2 Upgrading with non-hot-plug HDDs/SSDs
7.6.2.1 Preliminary steps
Ê
"Suspending BitLocker functionality" on page 111
Ê
"Shutting down the server" on page 58
Ê
"Disconnecting the power cord" on page 59
Ê
"Getting access to the component" on page 61
7.6.2.2 Upgrading with non-hot-plug HDDs/SSDs
Ê
Install the non-hot-plug HDD/SSD 1 as described in section "Installing a non-
hot-plug HDD/SSD" on page 267.
Ê
If applicable, install the non-hot-plug HDD/SSD 2 as described in section
"Installing a non-hot-plug HDD/SSD" on page 267.
Ê
Install the non-hot-plug cage as described in section "Installing the non-hot-
plug cage" on page 267.
Customer Replaceable Unit
(CRU)
Hardware: 10 minutes
Tools:
Phillips PH2 / (+) No. 2 screw driver
To Next Page
Loading...
