TX2560 M2 / RX2560 M2 Upgrade and Maintenance Manual
493
15 Converting a tower model to a
rack model
Safety notes
For further information, please refer to chapter "Important information" on
page 43.
15.1 Preliminary steps
Ê
"Shutting down the server" on page 58
Ê
"Disconnecting the power cord" on page 59
Ê
Remove all external cables.
Ê
"Getting access to the component" on page 61
I
The front cover is no longer required.
Ê
"Removing the anti-tilt bracket" on page 109
Field Replaceable Unit
(FRU)
Average task duration:
20 minutes
Tools:
– Phillips PH2 / (+) No. 2 screw driver
– Slotted screw driver
To Next Page
Loading...
Need help?
General