EasyManua.ls Logo

Fujitsu PRIMERGY TX2560 M2

Fujitsu PRIMERGY TX2560 M2
568 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
30
Upgrade and Maintenance Manual TX2560 M2 / RX2560 M2
Before you start
Please refer to the following ServerView Suite topics:
Operation
Virtualization
Maintenance
Out-Of-Band Management
I For the latest information on hardware options, refer to your server’s
hardware configurator available online at the following address:
for the global market:
http://ts.fujitsu.com/products/standard_servers/index.htm
for the Japanese market:
http://www.fujitsu.com/jp/products/computing/servers/primergy/
Please contact your local Fujitsu customer service partner for details on how to
order expansion kits or spare parts. Use the Fujitsu Illustrated Spares Catalog
to identify the required spare part and obtain technical data and order
information. Illustrated Spares catalogs are available online at
http://manuals.ts.fujitsu.com/illustrated_spares (global market only).
Replacing a defective component
The Global Error indicators on the front and rear sides of the server as well as
local diagnostic LEDs on the front panel report defective hardware components
that need to be replaced. For further information on the controls and indicators
of your server, refer to the operating manual of your server and section
"Connectors and indicators" on page 549.
If the system has been powered off in order to replace a non-hot plug unit, a
system of PRIMERGY diagnostic indicators guides you to the defective
component. The "Indicate LDL" button enables the indicator next to the
defective component even if the server has been switched off and disconnected
from the mains. For further information, please refer to sections "Using
diagnostics information" on page 55 and "Server front" on page 554.
If the defective component is a customer replaceable unit included in the CSS
concept (Customer Self Service), the CSS indicators on the front and rear side
of the server will light up.
It is recommended to prepare local maintenance tasks using remote diagnostics
procedures, as described in the "ServerView Suite Local Service Concept
(LSC)" manual.

Table of Contents

Other manuals for Fujitsu PRIMERGY TX2560 M2

Related product manuals