Fujitsu PRIMERGY TX2560 M2

TX2560 M2 / RX2560 M2 Upgrade and Maintenance Manual 393
Accessible drives
Mounting order for accessible drives
Figure 286: Accessible drive configurations
Order Accessible drive Drive bay Max. Occupied Interface
1
Optical disk drive (full
height)
Bay 1
1 1.6" x 5.25" SATA
1
LSD in Multibay
1 1.6" x 5.25"
I
2
C bus
Slimline ODD
in Multibay
SATA
2
Backup drive
LTO3 HH Ultrium
Bay 3
if occupied: Bay 2 or 1
1 1.6" x 5.25" SAS
2
Backup drive
LTO4 HH SAS (IBM)
1 1.6" x 5.25" SAS
2
Backup drive
LTO5 HH Ultrium
1 1.6" x 5.25" SAS
2
Backup drive
LTO6 HH SAS (IBM)
1 1.6" x 5.25" SAS
2
Backup drive
LTO7 HH SAS (IBM)
1 1.6" x 5.25" SAS
2
Backup drive
DDS Gen 6
2 1.6" x 5.25" USB 2.0
3
Backup drive
DDS Gen 5 / Gen 6
Bay 3
if occupied: Bay 2 or 1
2 1.6" x 5.25" USB 2.0
Table 5: Accessible drive mounting sequence
5.25“ x 1.6“ 5.25“ x 1.6“
5.25“ SL ODD 5.25“ SL ODD
Bay 1
3.5“ HDD
3.5“ LSD
5.25“ x 1.6“
4x/8x PCIe SSD
8 x 2.5“ HDD/
3.5“ HDD
5.25“ x 1.6“ Bay 2
3.5“ HDD
5.25“ x 1.6“ 5.25“ x 1.6“ Bay 3
3.5“ HDD
(Multibay)