NEC Xen IPK - Page 44

December 2004 NEC Business Solutions Ltd
24 – Chapter 1 DRAFT 3 Multiline Terminal Programming
Doc. No.: 8194 - Release 2.0 December 2004
29 Trunk Internal Transmit Pad Selection 2 dB 2 dB, 4 dB, 6 dB, 8 dB, 12 dB, 16 dB, 3 dB, -3
dB, 0 dB
30 Trunk Internal Receive Pad Selection 4 dB 2 dB, 4 dB, 6 dB, 8 dB, 12 dB, 16 dB, 3 dB, -3
dB, 0 dB
31 Trunk External Transmit Pad Selection 0 dB 2 dB, 4 dB, 6 dB, 8 dB, 12 dB, 16 dB, 3 dB, -3
dB, 0 dB
32 Trunk External Receive Pad Selection 0 dB 2 dB, 4 dB, 6 dB, 8 dB, 12 dB, 16 dB, 3 dB, -3
dB, 0 dB
33 Disconnect Recognition Time Selection 2.0 sec. 0 sec., .2 sec., .3 sec., .5 sec., .7 sec., .9
sec.,
1.0 sec., 1.2 sec., 1.4 sec., 1.5 sec., 1.7 sec.,
1.9 sec., 2.0 sec., 2.2 sec., 2.4 sec., 2.6 sec.
38 Automated Attendant Message to Trunk
Selection
Message 1 Message 1~8
39 Automatic Release Selection Yes Yes, No
41 ACD/UCD Delay Announcement
Assignment
Refer to ACD/UCD Delay Announcement Assignment on page 1-380.
42 DIT Assignment No Assignment Station No.
43 ANA Assignment No Assignment Station No.
44 Caller ID Display Assignment for CO/PBX
Line
Not Specified Telephone Port 01~96
45 Live Recording Trunk Selection No No = No Live Recording
Yes = Live Recording
52 ISDN Trunk Directory Number
Assignment
Not Specified Up to 13 digit per a CO/PBX Port No.
53 Caller Name Indication Selection Trunk Name No Indication, Caller No. Indication, Name
Indication (by SPD), Trunk Name
57 ISDN Dial-Out Sending Selection
59 Automated Attendant Function Selection Normal Normal, Delay Announcement
61 DIT Delay Answer Timer Selection Trunks (1-64) = 0 sec. 0s, 5s, 10s, 20s, 30s, 40s, 50s, 60s
62 DIT Tenant Assignment All CO/PBX Lines are set
to tenant 00
Trunk (1-64) can be set to a tenant (00-47)
63 DIT Holiday Mode Enable Holiday DIT = YES NO, YES
64 DIT Night Mode Delay Answer Enable Night DIT = NO NO, YES
65 Hold Tone Automated Attendant
Selection
All CO/PBX lines are set
to “NON”
NON, MSG1, MSG2, MSG3, MSG4, MSG5,
MSG6, MSG7, MSG8
67 CO Line Ringing Pattern Selection
for CO/PBX Line Mode
— = NON Pattern A~H
70 CIC Number Assignment
71 Caller Name Display Assignment
LK 3 CO/PBX Line Mode (Continued)
Data
No.
Memory Block Name Default Value Programming Values