The following procedure describes a single method but you can also perform many of the acons using
either the mouse, the r
eview module, or the viewpad depending upon the situaon. For more
informaon, see Review Module (page 378) and Viewpad (page 379).
When you review a biplane series on the touch screen module, instead of the frontal image and lateral
image displayed side by side as in the review window, the frontal image is displayed in the main
viewport, and the lateral image is displayed in a mini viewport within the main viewport.
Figure 66 Mini vie
wport in the main viewport
To swap the image in the main viewport with the image in the mini viewport, tap the mini viewport.
To reposion the mini viewport, touch the mini viewport and drag it to a new locaon.
1
Select the X
-ray Acquision applicaon on the touch screen module.
2 Select the Series task.
3 Tap a series in the task panel to open it in the main display area.
NOTE Biplane series are always displayed with the frontal series and lateral series side by side
in the Series task. When you select a biplane series, the corresponding series on the other
channel is also selected.
4 To replay the images in a series, do the following:
a To replay the series, tap Play.
b To pause the series, tap Pause
c To review the previous or next image in the series, tap Previous image or Next image.
d T
o review the previous or next series, tap Previous series or Next series.
Reviewing Reviewing a Series using the Touch Screen Module
Azurion Release 1.2 Ins
trucons for Use 119 Philips Healthcare 4522 203 52421