Philips Azurion - 3.2.1 Review Module

Figure 20 E
quipment in the control room
Legend
1 Touch screen module 4 Mouse
2 Monitors 5 Keyboard
3 Review module
The acquision windo
w displays live X-ray images and is used to change procedure sengs, and to
schedule procedures. When acquision is not being performed, you can use this monitor to perform
other tasks such as reviewing images and post-processing.
The review window allows you to work with studies and series from any paent. While acquision is
being performed in the examinaon room, you can use the review window in the control room to work
in parallel and perform tasks such as reviewing and post-processing, for any study, including studies and
series that do not relate to the acquision paent. For more informaon, see Instant Parallel
Working (page 117).
The control room may also contain addional equipment and workspots:
• Touch screen module
• Review module
• FlexSpot (opon)
• Addional FlexSpot (opon)
• Slave monitors (up to a maximum of three)
3.2.1 Review Module
The review module is located in the control room and provides controls for reviewing images in the
acquision window.
You can also perform some general funcons using the review module, for example, switching the
system on and o, disabling radiaon, disabling geometry movements, and reseng the uoroscopy
buzzer.
About the System Equipment in the Control Room
Azurion Release 1.2 Ins
trucons for Use 41 Philips Healthcare 4522 203 52421