Philips Azurion - 12.10 Changing Automatic Position Control Settings

c T
o close the dialog box without deleng the preset group, tap Cancel.
d To delete the preset group, tap Delete.
The preset group is deleted, including all presets contained within it.
8 To restore the factory default preset groups, do the following:
NOTE Restoring the factory default preset groups will overwrite all exisng presets and preset
groups, including customized presets and preset groups.
a Tap More and select Restore Defaults.
A conrmaon dialogue box is displayed.
b To close the dialog box without restoring the factory default preset groups, tap Cancel.
c To restore the factory default preset groups, tap Delete.
The factory default preset groups and presets are restored. Customized presets and preset
groups are deleted.
12.10 Changing Automac Posion Control Sengs
You can customize the Automac Posion Control (APC) sengs in the system for future use.
The system allows you to change, rename, copy, delete, and add new APC posions. You can also store
the current geometry for future use as an APC posion.
1 On the System menu, click Customizaon to display the System Customizaon window.
2 In the X-Ray Applicaon sengs group, click APC Posions.
If you are using a biplane system, the APC Posions dialog box allows you to select between
Monoplane or Biplane posions. You can use Monoplane posions on a biplane system, in which
case, only the posion informaon for the frontal channel is stored.
3 To rename an exisng APC posion, do the following:
a Select the APC posion in the Posion Name list.
The APC Posion Details are displayed.
b Enter a new name in the Posion Name eld.
The Posion Name list is automacally updated.
4 To change the sengs of a monoplane posion, do the following:
a Select Monoplane.
b Select the APC posion in the Posion Name list.
c Set the Rotaon Angle for the frontal stand using the slider or by entering a number in the box.
NOTE The labels used to indicate Rotaon Angle and Angulaon Angle depend on the
seng that is congured for Rotaon/Angulaon Display Flavor.
d Set the Angulaon Angle using the slider or by entering a number in the box.
e Set the Source Image Distance using the slider or by entering a number in the box.
f Select the Detector Orientaon from the drop-down list.
5 To change the sengs of a biplane posion, do the following:
User Cus
tomizaon Changing Automac Posion Control Sengs
Azurion Release 1.2 Ins
trucons for Use 223 Philips Healthcare 4522 203 52421