Philips Azurion - 13.12.3 Editing a ProcedureCard

1 In the r
eview window, click System and select Manage ProcedureCards.
The ProcedureCards Manager is displayed.
2 Select the ProcedureCard Group that you want to place the new ProcedureCard in.
3 Create a new ProcedureCard by doing one of the following:
• Click New.
• Copy an exisng ProcedureCard.
For more informaon about copying a ProcedureCard, see Copying a ProcedureCard (page 246).
A new ProcedureCard with the default tle My ProcedureCard is created and is visible in the list.
You can edit this new ProcedureCard to apply the desired sengs. For more informaon about
eding ProcedureCards, see Eding a ProcedureCard (page 245).
13.12.3 Eding a ProcedureCard
You can edit the sengs of a ProcedureCard.
The changes you make will aect all scheduled studies that have this ProcedureCard selected.
1 In the review window, click System and select Manage ProcedureCards.
The ProcedureCards Manager is displayed.
2 Select the ProcedureCard Group containing the desired ProcedureCard.
3 Select the desired ProcedureCard.
4 To edit general ProcedureCard informaon, do the following:
a Select the General tab.
b Edit the general ProcedureCard informaon as desired.
5 To edit the available X-ray sengs, do the following:
a Select the X-ray Acquision tab.
b Select the X-ray protocols available for use with the ProcedureCard.
c Set the default X-ray protocol for the ProcedureCard.
d Reorder the X-ray protocols as desired.
6 T
o change the preset screen layout used for FlexSpot, do the following:
a Select the FlexSpot tab.
b Change the preset group by selecng a new group from the list.
c Select the new preset to use.
7 To change the preset screen layout used for FlexVision, do the following:
System Adminis
traon Managing ProcedureCards
Azurion Release 1.2 Ins
trucons for Use 245 Philips Healthcare 4522 203 52421