Philips Azurion - 18.5.3 Collision Indicators

Legend Descripon
6
Table lt
1
The table lt angle
Table cradle
1
The table cradle angle
Table pivot
1
The table pivot angle
Table lateral isocenter
o
set
1
The lateral o
set of the table from the isocenter posion
Table longitudinal iso-
cen
ter oset
1
The longitudinal o
set of the table from the isocenter posion
Table height isocenter
o
set
1
The height o
set of the table from the isocenter posion
Isocenter
1
The table is in the isocenter posion
7 - System messages System in
formaon, warnings, and error messages (for each channel)
8
- X-ray protocol The selected procedure sengs
- fps Exposure speed (selected/actual)
- Fluoroscopy avor The currently selected uoroscopy avor
9 - Dose model For more informaon, see Dose Model (page 388)
10 - mGy/min Air kerma rate
11 - min Fluoro me (for the channel)
12 - mGy Cumulave air kerma
13 - Dose area product
Displays the cumulav
e dose area product (Gy cm
2
)
14 - Total uoroscopy me Displays the total uoroscopy me
15
System me / s
top-
watch
Displays the system me. If the stopwatch is acve, the stopwatch me is
displayed
1
If a c
ollision is detected, this secon in the status area displays collision detecon warnings and icons.
2
Only displayed if the thorax region is selected.
18.5.3 Collision Indicators
When a collision is detected, a collision indicator is displayed in the status area.
Icon Descripon
A detector collision has been detected
A stand collision has been detected (depending on the stand in use)
Quick Reference Status Area
Azurion Release 1.2 Ins
trucons for Use 369 Philips Healthcare 4522 203 52421