Philips Azurion - 16.6.2 Supported Monitor Combinations; 16.6.3 MCS Cabling Interface

Movement Range
MCS
Rotaon [de-
gr
ees]
Horizontal Horizontal Vercal [mm]
X-axis [mm] Y-axis [mm]
Ceiling height be-
low 2900 mm
Ceiling height
2900 mm and
above
3-fold (one large
screen, two op-
onal 27-inch
monitors)
330 3000 3600 Not available 320
NOTE Vercal mo
vement is only available where ceiling height permits.
Actuator
When available, vercal movement is provided by the actuator.
Item Specicaon
Mains voltage 230 V
Mains frequency 50 / 60 Hz
Maximum power c
onsumpon 500 W
Maximum speed 12 mm/s (0.5 in/s)
16.6.2 Supported Monitor Combinaons
The f
ollowing combinaons of supported monitors can be used.
NOTE A combinaon of the monitors listed below can be combined with dummy monitors or any
other monitors. However, the number of monitors mounted must not exceed the maximum-
fold MCS conguraon. That is, only 6 monitors can be mounted in a 6-fold MCS.
2-fold MCS supports two 27-inch monitors.
4-fold MCS supports three or four 27-inch monitors.
6-fold MCS supports the following conguraons:
• Four, ve, or six 27-inch monitors.
• Four 27-inch monitors with two other supported monitors.
1-fold XL MCS supports one 58-inch monitor.
3-fold XL MCS supports one 58-inch monitor and two 27-inch monitors.
16.6.3 MCS Cabling Interface
The monitor ceiling suspension provides the following cabling for an oponal monitor.
Cabling
Item Specicaon
Mains supply 100-240 Vac
50-60 Hz
Pr
otecve earth
Video signal DVI-D input connector
DVI-D output connector
Mulple frequencies up to 1920 x 1200, 60Hz
Technical In
formaon Monitor Ceiling Suspension
Azurion Release 1.2 Ins
trucons for Use 276 Philips Healthcare 4522 203 52421