Philips Azurion - Positioning the Ceiling-Suspended Radiation Shield; 5.9.8 Using Sterile Covers

Posioning the Ceiling-Suspended Radiaon Shield
Figure 44 Ceiling-suspended r
adiaon shield in the working posion
1 If desired, place a sterile bag over the apron of the shield and part of the lead acrylic shield,
securing the bag in the two notches.
2 Move the shield to the desired posion using the suspension arm.
3 Tilt the shield to the desired posion.
5.9.8 Using Sterile Covers
Detailed procedures for ng sterile covers are the responsibility of the healthcare environment.
Place a thin sheet of sterilized plasc over the tabletop, control modules, and pan handle. The viewpad,
touch screen module, mouse and mouse table, radiaon shields, foot switch, and detector must be
covered separately.
NOTE When using a sterile cover on the touch screen module, ensure that the cover is ed ghtly
to avoid problems when using the touch screen for acons such as dragging.
Preparing a P
aent Study Preparing the System
Azurion Release 1.2 Ins
trucons for Use 68 Philips Healthcare 4522 203 52421