Philips Azurion - 16.7 Springarm Monitor Ceiling Suspension; 16.8 Medical Monitor Boom; 16.9 Examination Light

The mains supply and pr
otecve earth can be connected as a part of the system. Alternavely, if the
monitor and its related equipment need to be electrically and galvanically isolated, the monitor can be
connected separately from the system.
Oponal Monitor
Item Specicaon
Mounng in
terface VESA interface
100 x 100 mm
Maximum power consumpon 100 W
16.7 Springarm Monitor Ceiling Suspension
The spring
arm MCS is available in the following conguraons:
• 2-fold springarm MCS for two 27-inch (9 kg) monitors.
• 3-fold springarm MCS for one 27-inch (9 kg) monitor and two 19-inch (5 kg) monitors.
A dummy monitor can be used to susbtute one of the monitors in either conguraon. Addional
components cannot be mounted in the springarm MCS.
The lifeme of the 2-fold and 3-fold springarm MCS is 10 years.
16.8 Medical Monitor Boom
A medical monitor boom can be used to hold the monitors of the X-ray system.
For more informaon, refer to the Instrucons for Use supplied with the medical monitor boom.
16.9 Examinaon Light
Item Specicaon
Light intensity 60,000 lux at 1 m
Color temperature 4300 K
Color rendering index 95
Focusable light eld siz
e 13 to 19 cm (5.1 to 7.5 inch)
Working distance 70 to 140 cm (27.6 to 55.1 inch)
Lamp type LED 1.2 A / 24V DC, 28 W
Mains power 100 to 240 V AC, 50 to 60 Hz
Weight < 15 kg
Maximum radiaon in eld
210 W/m
2
a
t 1 m
Temperature increase in head area 0.5 °C (33°F)
Technical In
formaon Springarm Monitor Ceiling Suspension
Azurion Release 1.2 Ins
trucons for Use 277 Philips Healthcare 4522 203 52421