Philips Azurion - 6.9.2 Using the Screen Saver on FlexVision; 6.10 Using Switchable Monitors

6 En
ter a name for the new preset using the on-screen keyboard.
7 To close the dialog box without saving the preset, tap Cancel.
8 To save the preset, tap Save.
6.9.2 Using the Screen Saver on FlexVision
When not acquiring X-ray images, you can display a screen saver on the FlexVision monitor.
NOTE The screen saver cannot be started while X-ray acquision is in progress.
1 On the touch screen module, tap the applicaon selector.
2 Tap FlexVision.
3 Tap ComfortThemes.
Movies that are available for the screen saver are displayed.
4 To start a movie as the screen saver, do one of the following:
• Double-tap a movie.
• Tap a movie to select it and then tap Play.
The movie starts playing on the FlexVision monitor. The top bar and the status area remain visible
while the movie is playing. Nocaons are displayed on top of the movie.
NOTE You cannot create screenshots while the screen saver is acve.
5 To dismiss the screen saver, tap Stop on the selected movie.
The screen saver is dismissed automacally if you start X-ray acquision or interact with the top bar
or status area using a mouse.
6.10 Using Switchable Monitors
Using this opon, you can choose which applicaons or video sources to display on each monitor in the
examinaon room and save that conguraon for future use.
To be able to switch video sources in this way, the switchable monitors opon must be installed on your
system.
Performing Procedures Using Switchable Monitors
Azurion Release 1.2 Ins
trucons for Use 94 Philips Healthcare 4522 203 52421