Philips Azurion - 12.9 Managing Preset Groups for FlexVision Using the Touch Screen Module

a T
ap More.
b Tap Order Presets.
c Select the preset you want to move.
d Tap Le or Right to move the preset thumbnail to the desired posion in the list.
e To save the preset in the new posion, tap Save.
f To close the menu without saving the preset in the new posion, tap Cancel.
12.9 Managing Preset Groups for FlexVision Using the Touch
Screen Module
You can create, rename and delete preset groups for FlexVision using the touch screen module.
Preset groups allow you to group presets to make them easier to nd or to group related presets
together.
For informaon about managing preset groups from the control room, see Managing Preset Groups
from the Control Room (page 217).
1 On the touch screen module, tap the applicaon selector.
2 Tap FlexVision.
3 Tap Manage Presets.
4 Tap More and select Manage Groups.
5 To create a new preset group, do the following:
a Tap New.
A new preset group is added to the list of available preset groups with the name My Preset
Group.
b Select the new preset group in the list and perform step 6 to rename the preset group.
6 To rename a preset group, do the following:
a Select desired preset group in the list.
b Tap More and select Rename.
The keyboard on the touch screen module is enabled.
c Edit the preset group name using the keyboard on the touch screen module.
d To exit without renaming the preset group, tap Cancel.
e To rename the preset group, tap Save.
7 To delete a preset group, do the following:
NOTE Deleng a preset group will delete all presets contained in the preset group.
a Select desired preset group in the list.
b Tap More and select Delete.
A conrmaon dialogue box is displayed.
User Cus
tomizaon Managing Preset Groups for FlexVision Using the Touch Screen
Module
Azurion Release 1.2 Ins
trucons for Use 222 Philips Healthcare 4522 203 52421