Philips Azurion - 18.2.2 FlexSpot Secondary Monitor; 18.2.3 Additional FlexSpot; 18.3 FlexVision (Option)

Applicaon Ar
ea
The applicaon area is similar to the applicaon area of the acquision monitor of systems without the
FlexSpot opon. For more informaon, see Acquision Monitor (page 349).
System Status Area
This area contains the following items:
• Status icons
• Exposure/uoroscopy data
• Stand and detector informaon
• Table informaon
• Dose data
• User guidance
• System informaon
18.2.2 FlexSpot Secondary Monitor
The FlexSpot secondary monitor does not display the system menus in the header area. To access items
in the System menu (for example, Customizaon or Manage ProcedureCards), make sure that the
review window is displayed somewhere on one of the two monitors.
18.2.3 Addional FlexSpot
The Addional FlexSpot is situated in the control room or examinaon room. It is a single-monitor
WorkSpot that can be added to a FlexSpot conguraon.
It provides one window displaying one applicaon at a me. Depending on the conguraon, you can
change the applicaon that is displayed in the window.
A keyboard and mouse are also provided for this monitor.
18.3 FlexVision (Opon)
FlexVision is a single ultra-high-denion monitor situated in the examinaon room.
The FlexVision monitor has three xed areas that are always displayed:
• Top bar
• System status area
• Live X-ray window
Quick Reference FlexVision (Opon)
Azurion Release 1.2 Ins
trucons for Use 355 Philips Healthcare 4522 203 52421