Philips Azurion - Page 126

• Display the desired loc
aon in the overview image.
• Select Fixed Anatomy in the Reconstrucon control panel.
When the anatomy is xed and you click Next image or Previous image in the navigaon toolbar,
sequenal images are displayed higher or lower in the main view so that the anatomy in each
image is displayed in the same posion in the view. Fixing the anatomy assists you with reviewing a
region of interest in a series of the original images.
NOTE When Fixed Anatomy is enabled, the movie review funcon cannot be used.
5 To zoom the original images in the main view, click Zoom on the main view toolbar and do the
following:
• To zoom in, drag upward.
• To zoom out, drag downward.
You can also zoom the view directly by pressing Ctrl and rotang the wheel buon, even when the
Zoom tool is not selected.
NOTE The overview image cannot be zoomed.
6 To pan the original images in the main view, click Pan on the main view toolbar and drag the image
to pan the view.
You can also pan the view directly by dragging with the right mouse buon, even when the pan tool
is not selected. The overview image cannot be panned.
7 To adjust the brightness and contrast of the overview image or the original images, click
Brightness / Contrast on the corresponding toolbar and do the following:
• Drag the pointer upward to decrease the brightness level.
• Drag the pointer downward to increase the brightness level.
• Drag the pointer to the right to decrease the contrast level.
• Drag the pointer to the le to increase the contrast level.
You can also adjust the brightness and contrast directly by pressing Ctrl and dragging with the
middle mouse buon, even when the brightness/contrast tool is not selected.
8 To invert the gray values of the overview image or the original images, click Invert on the
corresponding toolbar.
9 To create a snapshot of the overview image or of the original image displayed in the main view, click
Snapshot on the corresponding toolbar.
Before creang a snapshot, ensure that the appropriate level of paent informaon is displayed in
the image using the Image overlays tool in the global tools panel.
The snapshot is saved in the paent database under the current study.
10 To send the overview image or the currently displayed original image to a reference view in the
examinaon room, click Copy to Reference on the corresponding toolbar.
Depending on the conguraon of your X-ray system, you can choose to send the image to
reference view 1, reference view 2, or reference view 3.
11 To reset the overview image or the original images to their default presentaon state, click Reset in
the corresponding toolbar.
12 To hide the overview image and display only the original images, select Hide Reconstrucon in the
Reconstrucon control panel.
13 If another bolus chase reconstrucon is available for the paent, you can select the reconstrucon
in the Exisng Reconstrucons panel of the Reconstrucon control panel.
Reviewing Bolus Chase R
econstrucon
Azurion Release 1.2 Ins
trucons for Use 126 Philips Healthcare 4522 203 52421