Philips Azurion - Page 288

Video Connecon
Item Specicaon
Standard DVI 1.0
Connector type DVI-I
Cable length (external equipment side) 3 m DVI-I to DVI-I cable
3 m V
GA to DVI-I cable
Supported resoluons Up to 1920 x 1200 x 60 Hz (WUXGA)
Supported clock frequencies 25-165 MHz
DVI lanes supported 1
Supported features EDID / DDC2, Hot Plug Detect oponal
USB Connecon (Oponal)
Specicaon
Standard USB 1.1
Supported speeds Normal speed and full speed (maximum 12 Mbps)
Cable length (external equipment side) 3 m
Ethernet Connecon
Specicaon
Standard IEEE Std. 802.3u/x (1000 Mbps)
Connector type RJ45 shielded, CAT7 compliant
Cable length (external equipment side) 3 m
AC Power Input
Specicaon
Cable length (molded cable for EU and US) 3 m
Un (nominal voltage r
ang) 100 – 240 V
In (nominal current rang) 1 A
Fn (nominal frequency rang) 50 / 60 Hz
Sn (nominal apparent power rang) 40 VA
Fuse 1 A slow blow
Polluon degree 2
DC Power Output
Specicaon
Cable length 30 m
Voltage 5 V
Amperage 1 A
Wall Connecon Bo
x in the Examinaon Room
The wall connecon box in the examinaon room should be mounted with the external interface
connectors facing downwards.
Technical Informaon Wall Connecon Box
Azurion Release 1.2 Ins
trucons for Use 288 Philips Healthcare 4522 203 52421