Philips Azurion - Page 329

Table Secondary Circuit Outlet
A label f
or the secondary circuit outlet power socket can be found at the rear of the table base.
Figure 152 Sec
ondary circuit outlet label
The label text states that the socket provides up to 600 VA at 230 V (50/60 Hz) with a maximum inrush
(surge) current of 90 A.
NOTE Exceeding these rangs risks damage to the system.
The following label near the secondary circuit outlet label indicates the locaon of a protecve
conductor (equipment grounding conductor).
The following label near the POAG-type pot
enal equalizaon pins indicates the locaon of potenal
equalizaon for Physio/ECG equipment or injectors. For more informaon, see Installaon and
Equipment Connecons (page 344).
Figure 153 P
otenal equalizaon label
Table Accessory Rail
The label on the table accessory rail provides informaon about correct use of paent straps. For more
informaon, see Using Paent Straps (page 54).
Figure 154 P
aent straps label on the table accessory rail
Maress Label
The label for the maress provides basic informaon about the model number, part number, serial
number, and manufacturer.
Figure 155 Mar
ess label
Table-Mounted Radiaon Shield Label
The label for the table-mounted radiaon shield provides basic informaon about the model number,
part number, serial number, and manufacturer.
Technical In
formaon Equipment Labels
Azurion Release 1.2 Ins
trucons for Use 329 Philips Healthcare 4522 203 52421