Siemens SCALANCE W1750D CLI - Page 53

CLI Commands
4.1 A
SCALANCE W1750D CLI
Function Manual, 03/2019, C79000-G8976-C452-04
53
Command/Parameter
Description
Range
Default
client-match
Enables the client match feature on APs.
When the client match feature is enabled on
an AP, the AP measures the RF health of its
associated clients. If the client's RSSI is less
than 18dB but has a good RSSI with another
AP having an RSSI of more than 30db or
atleast 10db more than its current RSSI, the
client will be moved to the AP with the higher
RSSI for better performance and client expe-
rience. In the
current release, the client match feature is
supported only within the APs within the
swarm.
— —
bad-snr <snr>
The clients with an SNR value below the
threshold value will be moved to a potential
target AP.
0 - 100 18
calc-
interval<seconds>
Configures an interval at which client match is
calculated.
1 - 600 in sec-
onds
3
calc-threshold
<threshold>
Configures a threshold that takes acceptance
client count difference among all the channels
of Client match into account. When the client
load on an AP reaches or exceeds the
threshold in compariso n, client match is ena-
bled on that AP.
1 - 255 5
client-thresh
<thresh>
When the number of clients on a radio ex-
ceeds the value, SLB algorithm will be trig-
gered.
0 - 255 30
debug <level>
Displays information required for debugging
client match issues.
0 - 4
• 0 — none
• 1 — error
• 2— infor-
mation
• 3 — debug
• 4 — dump
1- error
good-snr <snr>
The APs with a RSSI higher than the speci-
fied good-snr value will be considered as a
potential target AP.
0 - 100 30
holdtime <number>
Configures the hold time for the next client
match action on the same client.
1 - 1800 300
key <key>
Configures the client match key of an AP. 1– 2147483646 VC key gen-
erated
max-adoption
<count>
Configure a maximum number for adopting
clients.
0 - 100 10
max-request <count>
Configures the maximum number of requests
for client match
0 - 100 10
nb-matching <per-
centage>
Configures a percentage value to be consid-
ered in the same virtual RF neighborhood of
Client match.
20 - 100% 75%