2000/3000 SHEET FINISHERS (B700/B701) August, 2006
1-64
1.8.2 INSTALLATION
This section shows the installation instructions for two finishers:
• B700 2000-Sheet Booklet Finisher: This can do punching, shifting, stapling,
and saddle-stitching with staples. This booklet finisher can be used with the e-
STUDIO4500c/5500c.
• B701 3000-Sheet Finisher: This can do punching, shifting, and stapling but with
no saddle-stitching unit. This finisher can be used with the e-
STUDIO4500c/5500c.
NOTE:
• Differences in the installation procedures are shown as “B700” or “B701”.
• Be careful not to touch the sharp edge on the guide [A] indicated in the figure.
WARNING!
Always turn the machine off and disconnect the machine power cord
before you do these procedures.
B700I209.MWF
To Next Page
Loading...
