Remove the Retainers in the Drawer Unit
1. Turn the lever [A] counter-clockwise, and pull the drawer unit [B] out of the
machine until it stops.
2. Remove the instruction sheets [C] and [D].
3. Remove the bracket and tag [E] at the rear.
4. Remove the bracket and tag [F] at the front.
Important
• A sheet of paper protects the ITB if you accidentally pull the drawer out
without first removing the rod. Do not push the drawer into the machine.
Follow the procedure on the instruction sheet to remove the rod and paper.
To Next Page
Loading...
Need help?
General
