FIRMWARE UPDATE April, 2007
5-18
5.4.3 UPLOADING AND DOWNLOADING NVRAM DATA
Uploading NVRAM Data to an SD card
Always upload the NVRAM data to an SD card before you repolace the NVRAM.
1. Before you turn the machine OFF, do SP5990 001 (SMC Report Print). This
gives you a record of the NVRAM settings if the upload fails and tells you the
serial number of the machine.
2. Turn the copier main power switch OFF.
3. Put the SD card into Slot 3, then turn the copier ON.
4. Do SP5824 001 then press the “Execute” key
When uploading is completed, a file is coped to the NVRAM folder on the SD
card. The file is saved to this path and filename:
NVRAM\<serial number>.NV
Here is an example for Serial Number “B0700017”:
NVRAM\B0700017.NV
5. To prevent an error during the download, write the serial number of the
machine on the SD card.
To Next Page
Loading...
Need help?
General
