SERVICE PROGRAM MODE April, 2007
5-4
SP Mode Button Summary
Here is a short summary of the touch-panel buttons.
(1): Open All.
Opens all SP groups and sublevels.
(2): Close All.
Closes all open groups and sublevels and restores the initial SP mode display.
(3):
Copy Window.
Opens the copy window (copy mode) so you can make test copies. To return to the SP
mode screen, press SP Mode (highlighted) in the copy window.
(4):
SP Direct.
Enter the SP code directly with the number keys if you know the SP number, then press
[#]. (SP Direct must be highlighted before you can enter the number. Just press SP
Direct if it is not highlighted.)
(5):
Exit.
Press twice to leave the SP mode and return to the copy window to resume normal
operation.
(6):
SPnxxx.
Press any group number to open a list of SP codes and titles for that group. For
example, to open the SP code list for SP1-nnn, press "SP1XXX". If an SP has sublevels,
it is marked with a right pointing triangle.
(7):
Group.
Press to scroll the display to the previous or next group.
(8):
Page.
Press to scroll to the previous or next display in segments the size of the screen display
(page).
(9):
Line.
Press to scroll the display to the previous or next line, line by line.
(10):
To Next Page
Loading...
Need help?
General
