August, 2006 IMAGE ADJUSTMENTS
3-181
Adjustment Procedure
1. Enter SP mode and open SP2109.
2. Print Pattern 10.
NOTE: Print several printing patterns and average the measured values of the
leading edge and side-to-side registration values.
3. Do the leading edge registration adjustment.
• Check the leading edge registration and adjust it with SP1001.
• Select the adjustment conditions (paper type and process line speed).
• Input the value and press the [#] key.
• Check the leading edge adjustment by printing Pattern 10 with SP2109.
4. Do the side to side registration adjustment.
• Check the side-to-side registration and adjust it with SP1002.
• Select the adjustment conditions for the paper feed station.
• Input the value and press the [#] key.
• Check the side-to-side adjustment by printing Pattern 10 with SP2109.
To Next Page
Loading...
Need help?
General
