Attaching the Extensions for the B700/B701
1. Attach the three shoulder screws [A] ( x 3).
2. If the finisher has been previously installed, remove the ground plate [B] from
the finisher and save the screws.
3. Attach the bottom plate [C] ( x 2, M3 x 6) then attach the ground plate to the
bottom plate ( x 2).
4. Attach the bottom front cover extension [D] ( x 2, M4 x 8).
5. Attach the top front cover extension [E] ( x 2, M4 x 8).
6. Attach the rear cover extension [F] ( x 2, M3 x 6).
To Next Page
Loading...
