1.15.3 APPLICATIONS PROVIDED ON SD CARDS
These applications are available on SD cards [A]. You install them in Slot 2:
• Printer/Scanner Unit GM-2100
• PostScript3 Unit Type 3260 (B761)
• Data Overwrite Security Unit Type C (B735)
Slot 2 is the only slot available for these application SD cards.
If the customer must use more than one application, then the applications must be
put together on one SD card. (1.15.5)
Important
• Slot 1 (the lower slot) is for the system SD card only. The system SD card must
not be removed. The machine will show SC732 if a different SC card is put in
Slot 1.
• Slot 2 holds the application SD card. It also holds the target SD card when
applications are put together on one card.
• Slot 3 (the top slot) is used to update the machine firmware. It also holds the
source SD card when applications are put together on one card.
To Next Page
Loading...
