Toshiba e-STUDIO4500c - Pressure Roller

FUSING UNIT August, 2006
3-102
3.9.13 PRESSURE ROLLER
Remove:
• Fusing unit (3.9.2)
• Fusing unit upper cover (3.9.15)
• Fusing cleaning unit (3.9.5)
• Pressure roller fusing lamp (x1) (3.9.11)
[A]: Lower fusing entrance guide ( x2)
[B]: Front screw ( x2)
[C]: Rear screw ( x1)
[D]: Hot roller fusing lamp ( x1), heating roller fusing lamps ( x2)
[E]: Rotate the frame to the right, in the direction shown by the arrow.
[F]: Pressure roller.
NOTE: Lift pressure roller and remove without detaching shaft bearing and
gears.
B132R417.WMF
[A]
[B]
[C]
[F]
[E]
[D]
[B]