Toshiba e-STUDIO4500c - Motors; Pcu Motor, Drum Motor

MOTORS August, 2006
3-146
3.16 MOTORS
3.16.1 PCU MOTOR, DRUM MOTOR
1. Remove the rear covers. (3.2.6)
2. Open and lock the controller box. (3.2.11)
3. Remove the PCU stand [A] stored under the machine.
4. Remove the drum motor shaft tool [B] (shorter tool) from the bottom of the PCU
stand.
B132I718A.WMF
[A]
[B]