Toshiba e-STUDIO4500c - Installation; Removing Tape and Accessories

August, 2006 LCT (B473), LCT ADAPTER (B699)
1-51
Installation
1.6.2 INSTALLATION
Removing Tape and Accessories
WARNING!
Always turn the machine off and disconnect the machine power cord
before you do this procedure.
1. Remove the filament tape [A].
2. Remove the decals [B].
3. Remove the tape under the lid [C].
4. Remove the docking pins [D] (attached to the rear with tape).
5. Remove the docking pins [E].
B473I001.WMF
B473I002.WMF
[A]
[B]
[C]
[A]
[D]