ADDITIONAL INFORMATIONS April 2007
4-78
ACTION:
Advise end users to do the following.
1. If J098 or J099 occur, press the "Next" button [A] on the operation panel. Then,
follow the instructions that are displayed.
2. Do one of the following:
• Make sure the type and thickness of the paper match the type and
thickness settings in the machine.
OR,
• Turn OFF the Paper Type Detect and Double Feed Detect settings (see
next page).
Important: After you turn this setting OFF, if the type or thickness of the paper
does not match the settings in the machine, poor fusing can occur. No error
message will be displayed.
To Next Page
Loading...
