COVER INTERPOSER TRAY (B704) August 2006
1-106
Attaching the Extensions for the B706
Important!
• The procedures in this section are for installation of the cover interposer with the
B706 only.
• If you will install the cover interposer with the B700/B701, go to the next section.
Modify the Attachments for the B706
Front Door Extension:
1. Attach spacer [A] to the front door extension (top) ( x 2).
2. Remove the lower hinge [B] and replace it with [C] ( x 2).
Rear Cover Extension (Bottom):
3. Remove [D] and replace it with [E] ( x 1).
4. Remove [F] and replace it with [G] ( x 1).
Plate Extension (Bottom):
5. Remove bracket [H] and attach it to the end of the bottom plate extension
( x 2).
To Next Page
Loading...
Need help?
General
