Toshiba e-STUDIO4500c - Finisher Installation

3000-SHEET FINISHER (B706), FINISHER ADAPTER (B698) August 2006
1-90
Finisher Installation
1. Attach the rear joint bracket [A] ( x 2) (M4 x 14).
2. Attach the front joint bracket [B] ( x 2) (M4 x 14).
3. Remove the connector cover [C].
4. Attach the ground plate [E] ( x 2) (M3 x 6).
Important: Set the grounding plate so there is no gap [D] between the ground
plate and the bottom frame of the finisher.
B698I108.WMF
B706I004.WMF
[D]
[E]
[A]
[B]
[C]