PUNCH UNIT B702 (FOR B700/B701) August 2006
B700-66
Punch Unit Movement
[A]: Punch Movement Motor (M9)
[B]: Punch Movement HP Sensor (S21)
[C]: Punch Drive Motor (M24)
The punch movement motor (M9) [A] extends and retracts the punch unit to
position it at the correct position for punching.
The punch movement HP sensor (S21) [B] detects the position when it retracts,
switches off the punch position movement motor, and stops the punch unit at its
home position.
The punch drive motor (M24) [C] fires the punches that punch holes in the paper
below.
To Next Page
Loading...
