April, 2007 SERVICE PROGRAM MODE
5-5
SP Mode Print (SMC report print)
You can print an SMC Report to check the machine’s condition. The SMC Report is
a list of the SP commands and their settings.
5990 SP Mode Print (SMC Report Print)
In the SP mode, press ‘Copy Window’ to move to the copy screen, select the
paper size, then press Start. Select A4/LT (Sideways) or larger to make sure that
all the information is printed. Press ‘SP Window’ to go back to the SP mode,
select the necessary SP Print Mode, and press Execute.
001 All (Data List)
002 SP (Mode Data List)
003 User Program
004 Logging Data
005 Diagnostic Report
006 Non-Default (Prints only SPs that are set to values other than defaults.)
007 NIB Summary (Configuration, Systemlog, Nvramlog)
008 Capture Log
021 Copier User Program (Copy Management Report)
022 Scanner SP
023 Scanner User Program (Scanner Management Report)
To Next Page
Loading...
Need help?
General
