Toshiba e-STUDIO4500c Service Manual

-
16
-
WARNING
1. Avoid expose to laser beam during service. This equipment uses a laser
diode. Be sure not to expose your eyes to the laser beam. Do not insert
reflecting parts or tools such as a screwdriver on the laser beam path.
Remove all reflecting metals such as watches, rings, etc. before starting
service.
2. Make sure that the equipment will not operate before touching potentially
dangerous places such as laser beam exit of the laser optical unit.

Toshiba e-STUDIO4500c Specifications

General

Brand	Toshiba
Model	e-STUDIO4500c
Category	All in One Printer
Language	English