August, 2006 COMMON REMOVAL PROCEDURES
3-21
To re-install the drawer unit
1. Remove the right upper cover and the left upper cover. (3.2.3, 3.2.5,)
2. Open the front door.
3. Pull out the left rail and right rail.
4. Set the unit on the rails.
CAUTION
The drawer unit is very heavy (30 kg/66lb.). Make sure that hooks are
engaged with the holes on the rails.
5. Slowly push the unit into the machine until it stops.
6. Rotate the lever [A] clockwise to the vertical position.
7. Fasten the screws to the left rail [B] ( x2).
8. Fasten the screws to the right rail [C] ( x2).
Important! Make sure these screws are fastened and tight. This ensures that
the unit is positioned correctly.
B132R617.WMF
[A]
To Next Page
Loading...
Need help?
General
