Toshiba e-STUDIO4500c Service Manual

ADDITIONAL INFORMATIONS April 2007
4-88
7. Reinstall the drum charge roller onto the charge roller unit (1-bushing, 1-gear).
NOTE: Make sure bushing is inserted correctly inside the molding guide [F].
Also make sure the charging terminal [G] touches the charge roller end
correctly.
8. Reinstall the charge roller unit onto the PCU (2 screws).

[F]
[G]
Bushing is not inserted correctly
inside the molding guide.

Toshiba e-STUDIO4500c Specifications

General

Brand	Toshiba
Model	e-STUDIO4500c
Category	All in One Printer
Language	English