Toshiba e-STUDIO4500c - Page 486

ADDITIONAL INFORMATIONS April 2007
4-108
2. Toner Maximum Limitation
If the customer agrees to the toner maximum limitation change, reduce the value
as follows:
• For machines that use a Ricoh PS driver:
Set SP1106-001 to a value of 200.
Printer SP
Number
Description
Default
Settings
Final Solution
NOTE
1106-001 Toner Limit:
Photo
260 200 Toner maximum limitation
for Photo mode.
• For the Fiery E-7000 controller:
1. Open the "E-7000 PS Document Properties" dialog.
2. Click on the “Fiery Printing" tab, then select the "Image Quality" option.
3. Change the "Toner Reduction" setting to ON.
07/04