Toshiba e-STUDIO4500c - Page 527

April, 2007 SERVICE PROGRAM TABLES
5-35
2109 Test Pattern Write Test Pattern
Some of these test patterns are used for copy image adjustments but most are
used primarily for design testing. These test patterns do not use the IPU.
001
Image Add Select "1" to have the patterns selected with
SP2109 002 print overlapped on one another.
[0~1/1] 0:Off, 1:On
002
Select Pattern Allows you to select the pattern to print.
[0~21/1]
0 Off 14 Horizontal Cross-Stitch
1 1-Dot Line 15 Crop Marks
2 1-Dot Slant Cross-Stripe 16 Vertical Belt
3 2-Dot Horizontal Line 17 Checkered Flag
4 2-Dot Vertical Line 18 1-Dot 20 mm Grid
5 1-Dot Horizontal Line 19 1-Dot 20 mm Slant Grid
6 1-Dot Vertical Line 20 Horizontal Grayscale
7 1-Dot Independent 21 Horizontal Grayscale-White Stripes
8 2-Dot Independent 22 --- Not Used ---
9 4-Dot Independent 23 --- Not Used ---
10 Trim Area 24 --- Not Used ---
11 Belt Pattern 25 --- Not Used ---
12 100% Coverage 26 --- Not Used ---
13 Vertical Cross-Stitch 27 --- Not Used ---
004
Col Select:YCMK [0~255/1] DFU
005
Density:K [0~63/1]
006
Density:M
007
Density:C
008
Density:Y
011
Gray Density 1 [0~63/1]
012
Gray Density 2
013
Gray Density 3
014
Gray Density 4
015
Gray Density 5
016
Gray Density 6
017
Gray Density 7
018
Gray Density 8
019
Gray Density 9
020
Gray Density 10
021
Gray Density 11
022
Gray Density 12
023
Gray Density 13
024
Gray Density 14
025
Gray Density 15