Toshiba e-STUDIO4500c - Page 590

SERVICE PROGRAM TABLES April, 2007
5-98
4400
Org Edge Mask Set the Mask for Original
This SP sets the area to be masked during platen (book) mode scanning.
001
Book:Sub:LEdge
002
Book:Sub:TEdge
003
Book:Main:LEdge
004
Book:Main:Tedge
005
ADF:Sub:LEdge
007
ADF:Main:TEdge
008
ADF:Main:TEdge
[0~30/0.1 mm]
4417
IPU Test Pattern Set IPU Test Pattern
Use this SP to select the IPU test pattern to print.
Test Pattern [0~24/1]
0 Scanned Image 13 Grid Pattern CMYK
1 Gradation Main Scan A 14 Color Patch CMYK
2 Gradation Main Scan B 15 Gray Pattern (1)
3 Gradation Main Scan C 16 Gray Pattern (2)
4 Gradation Main Scan D 17 Gray Pattern (3)
5 Gradation Sub Scan 1 18 Shading Pattern
6 Grid Pattern 19 Thin Line Pattern
7 Slant Grid Pattern 20 Scanned + Grid Pattern
8 Gradation RGBCMYK 21 Scanned + Grayscale
9 UCR Pattern 22 Scanned + Color Patch
10
Color Patch 16 (1) 23 Scanned + Slant Grid C
11
Color Patch 16 (2) 24 Scanned + Slant Grid D
12
Color Patch 16 64
4440
Saturation Adj Adjust Color Saturation
This SP adjusts the saturation level for copying.
[0~5/1]
0: High
1: Lowest
2: Lower
3: Default
4: Higher
5: Highest