August, 2006 SERVICE PROGRAM TABLES
5-107
5113 Optional Counter Type (Not Used)
001 Default Optional Counter Type
Selects the type of counter:
0: None
1: Key card (RK3, 4) Japan only
2: Key card down
3: Pre-paid card
4: Coin Lock
5: MF key card
11: Exp Key Card (Add)
12: Exp Key Card (Deduct)
002 External Optional Counter Type
Enables the SDK application. This lets you select a number for the external
device for user access control.
Note: “SDK” refers to software on an SD card.
[0~3/1]
0: None
1: Expansion Device 1
2: Expansion Device 2
3: Expansion Device 3
5118 Disable Copying
Temporarily denies access to the machine. Japan Only
[0~1/1]
0: Release for normal operation
1: Prohibit access to machine
5120 Mode Clear Opt. Counter Removal
Do not change. Japan Only
[0~2/1]
0: Yes. Normal reset
1: Standby. Resets before job start/after completion
2: No. Normally no reset
5121 Counter Up Timing
Determines whether the optional key counter counts up at paper feed-in or at
paper exit. Japan Only
[0~1/1]
0: Feed count
1: No feed count
5126
F Org Size Set F Original Size Selection
Sets the original size that the machine detects for F sizes.
[0~2/1]
0: 8½ x 13
1: 8¼ x 13
2: 8 x 13
To Next Page
Loading...
